Decoder fitting compilation version1

Re:Decoder fitting compilation version1 (ntpntpntp)

Thu, 05 Jan 2012 09:15:51 GMT

Marklin/Maerklin MAXI 54505 "Jenny" decoder install
(This was something I posted on GSM back on 2008 I think. I've now put up a basic version on my own site)

http://www.falconer-family.org.uk/marklin_54505_dcc_fitting.html

Re:Decoder fitting compilation version1 (PaulRhB)

Mon, 19 Dec 2011 15:29:15 GMT

Useful info on getting LGB axles apart if fitting sound triggers
http://www.gscalecentral.co.uk/f/tm.aspx?m=183526&high=

Re:Decoder fitting compilation version1 (PaulRhB)

Tue, 28 Jun 2011 17:14:09 GMT

Another useful fault fix this time for ESU decoders
http://www.gscalecentral.co.uk/f/tm.aspx?high=&m=150292&mpage=1#150520

Re:Decoder fitting compilation version1 (stockers)

Mon, 29 Nov 2010 19:55:24 GMT

Stainz dismantling/decoder fitting link added to top post.

Re:Decoder fitting compilation version1 (PaulRhB)

Sun, 15 Aug 2010 11:52:25 GMT

Thanks to Muns for this one

Setting the default COM port on your PC for LGB prpgramming module. http://www.gscalecentral.co.uk/f/m76573.aspx

Re:Decoder fitting compilation version1 (Zerogee)

Fri, 11 Jun 2010 07:48:56 GMT

This thread is always a hugely useful resource, Paul, thanks for keeping it current (no pun intended....).

The most recent post about chipping the little Playmobil maintenance unit is very timely indeed, since I've just acquired one myself - it is getting put away for the time being as a long-term project, but the plan is to sound-chip it (probably a massoth LS, got to choose a suitable sound file for it - would the "generic small diesel" Kof type sound right for this, or maybe the file for something petrol-engined like the pigsnout railbus might be better?) and possibly fit lights, plus weather it up thoroughly and change handrails etc. to make it a bit less toylike.

If anyone else has experiences with these, or pics of what they've done with one, I'd be pleased to know!

Re:Decoder fitting compilation version1 (PaulRhB)

Fri, 11 Jun 2010 06:00:19 GMT

quick bump to keep it useful

Re:Decoder fitting compilation version1 (ntpntpntp)

Sat, 10 Apr 2010 10:54:24 GMT

TCS T1 Decoder into Playmobil motor block
As far as I know, this should be applicable to all the older track-powered Playmobil range.

Re:Decoder fitting compilation version1 (Mez)

Sat, 10 Apr 2010 10:37:16 GMT

This should be a sticky thread!

Re:Decoder fitting compilation version1 (stevelewis)

Sat, 10 Apr 2010 09:36:42 GMT

RE DECODER FITING IN OLDER 3 WIRE SYTEM GEARBOX LOCOS.----------------
-----------------------------------------------------------------------------------------

I have completed installation of a Massoth XL decoder in my LGB QM ALCO Diesel loco.

I devised what I think is a simple method of overcoming the 'problem' of the common WHITE cable on one side of the gearboxes...........this cable both supplies picked up power to loco's ANALOGUE PCB and and is also the same connector for one side of the motor supply, so therefore in DCC mode this is a no go situation!!

This motor feed and pickup MUST be seperated!!

I achieved this quite simply!

I insulated with around 10mm of plastic tape the metal strip which connects electrically the skate & carbon wheel pickups on the gearbox side which has the SINGLE white cable. the small piece of insulation is positioned to isolate the PIN to which the single WHITE cable, so now the PIN only supplies power to the motor contact, and the white cable becomes a motor feed from the DECODER

I soldered a NEW lead to the BRASS skate holder on the G box, this lead now supplies track power to one decoder input,
(it is nescessary to drill a couple of small holes in the gearbox housing to route the NEW cable inside the loco to the decoder,)

So from then in its just normal hard wired decoder installation using the 3 original LGB cables and the NEW cable for decoder input and motor feed, remembering of course its a bogie loco so it all has to be done twice!!

Lghts all wired to decoder and original PCB removed, it all worked first time.

I forgot to take phots, but I will prob be doing another and will remeber to do so then!

Re:Decoder fitting compilation version1 (stevelewis)

Fri, 02 Apr 2010 17:29:17 GMT

PaulRhB

The old 3 pin blocks added to the top post thanks to Steve Parberry

I will try to add photos to my post when I do the job ( Its an ALCO Diesel dated 1990 D&RGW QM series)

Re:Decoder fitting compilation version1 (PaulRhB)

Fri, 02 Apr 2010 13:36:37 GMT

The old 3 pin blocks added to the top post thanks to Steve Parberry

Re:Decoder fitting compilation version1 (pjti)

Sat, 13 Mar 2010 14:51:57 GMT

Clearance problems when fitting QSI Magnum PnP (or not) on Aristo's RS3

Another headache solved re : QSI and RS3 - I wish I had seen this before I "modified" mine

Re:Decoder fitting compilation version1 (PaulRhB)

Sat, 13 Mar 2010 14:08:24 GMT

QSI SOUND DECODER PROBLEM & SOLUTION - thanks to Steve Lewis
http://www.gscalecentral.co.uk/f/m47379.aspx

Re:Decoder fitting compilation version1 (PaulRhB)

Wed, 10 Mar 2010 19:15:23 GMT

Thomas gets a voice and creating your own soundfiles thanks to Cliff
http://www.gscalecentral.co.uk/f/m44640.aspx

Re:Decoder fitting compilation version1 (palmerston)

Sun, 14 Feb 2010 09:04:19 GMT

A lot of info about fitting decoders in LGB-Piko-Bachmann-Brekina can be found on the Massoth forum:
[link=http://massoth.gotdns.com:81/forumde/viewforum.php?f=24&sid=f6e98e0e0e013ce3aed32ba8995d2d45]http://massoth.gotdns.com...013ce3aed32ba8995d2d45
[/link]

Re:Decoder fitting compilation version1 (PaulRhB)

Mon, 01 Feb 2010 03:56:13 GMT

OK I've redone all the links so they are accurate addressess for the relevant threads.

if you click on some of the links it causes an error, copy the link and paste it into the address box at the top of your screen and it will work fine.

Re:Decoder fitting compilation version1 (pwilliams642)

Thu, 28 Jan 2010 20:48:04 GMT

paul,can you help please ?
i have chipped an old steeple cab using a mts decoder -simple instalation - but wish to control the lights and use the multiplugs for carrage lighting.

the lighting at each end ( 2 bulbs) is mounted onto a p.c.b. with the pins for the sockets.
i know where to connect the lighting wiring to the mts module, but how do i connect the multiplugs, please?.

ps seems to be a website fault, the links to your instructions take me to the index page

many thanks, pete

Re:Decoder fitting compilation version1 (whatlep)

Sun, 17 Jan 2010 18:45:21 GMT

Piko BR80 - Disassembly and DCC fitting:
http://www.gscalecentral.co.uk/pikos-br80-sows-ear-or-silk-purse?

Re:Decoder fitting compilation version1 (PaulRhB)

Sun, 17 Jan 2010 14:53:58 GMT

Some general stuff for setting up Loksound decoders to use with MTS.
http://www.gscalecentral.co.uk/f/tm.aspx?m=29364

Altering sounds on ESU chips, (Cliff makes Thomas speak! Methods applicable to creating any of your own sound files)
http://www.gscalecentral.co.uk/f/m44640.aspx

Another useful fault fix this time for ESU decoders
http://www.gscalecentral.co.uk/f/tm.aspx?high=&m=150292&mpage=1#150520

Smoke units and DCC
http://www.gscalecentral.co.uk/f/tm.aspx?m=22355

"The trials of a novice", when a loco doesn't appear to respond correctly to some commands
http://www.gscalecentral.co.uk/f/m47070.aspx

QSI SOUND DECODER PROBLEM & SOLUTION
http://www.gscalecentral.co.uk/f/m47379.aspx

Setting the default COM port on your PC for LGB prpgramming module.
http://www.gscalecentral.co.uk/f/m76573.aspx

Not strictly DCC but excellent servicing guide to LGB motors by Neil Robinson
http://www.gscalecentral.co.uk/f/tm.aspx?m=1237&high=